Need a stable position while fishing from your kayak? Try a kayak anchor trolley. While you are out kayak fishing, getting a relevant, sustainable, comfortable anchored position will require one of the following three things:
- Ideal tide movement and weather conditions
- A lot of added effort, time, and discomfort anchoring, as well as being forced to redeploy/reposition or
- A kayak anchor trolley
All of us have seen the Pro Staff magazine covers and pictures which have pricey boats with the anchor trolleys, yet what are they and why do you have to have it?
- What is a Kayak Anchor Trolley?
- Top Four Reasons You Have to Have an Anchor Trolley
- Kayak Anchor Trolley: What are the benefits?
- Why Should You Want a Kayak Anchor Trolley?
- Kayak anchor trolley: How does it work?
- Why do you want a kayak anchor trolley?
- Kayak anchor trolleys: Are they expensive?
- Ways to use the Kayak Anchor Trolley
- Ways to Install the Anchor Trolley System
What is a Kayak Anchor Trolley?
The anchoring position is comprised of your boat, anchor line, and an anchor. A kayak anchor trolley essentially becomes an extension of the anchor line by crafting an adjustable attachment point to the boat. An efficient anchor trolley will act as an adjustable anchor cleat; therefore, permitting you to adjust the boat’s angle based upon tide movement or changing wind conditions.
Advanced kayak anglers utilize kayak anchor trolleys upon each side of the kayak to offer versatility in selecting an anchored position. Because after all, the possibility for versatility is just as strong as the quantity of anchoring choices you give yourself while rigging!
Top Four Reasons You Have to Have an Anchor Trolley
Takes Away the Necessity for Several Anchor Cleats
What the majority of kayak anglers don’t know is that you can’t have a single anchor cleat rigged to the kayak within a spot that’s favorable to all anchoring positions. You must instead initially read the conditions then accordingly adjust the anchors connection point. In order to replace the anchor trolley with the anchor cleat it’d require installing several anchor cleats alongside the starboard and port sides of the kayak. The secret to success is offering yourself long-range anchoring flexibility, which ultimately will lead to an easier anchoring experience.
Offers Positioning Flexibility with Changing Currents and Winds
You got lucky and chose the proper spot on the kayak to put on an anchor cleat. As you get in the water, you cannot stop catching fish! What will happen as the wind changes direction? What will happen as the current pushes you to the opposite part of the anchor? The anchor trolley offers a simple method of making fast adjustments when out in the water.
Anchor Trolleys Compatible with the Majority of Anchors
Anchor choice is based upon a blend of personal preference, as well as compatibility with the bottom of the water body you’re fishing. If the bite is slow when stationary, switch the grapnel anchor for a drift chute then go for the controlled drift over the old honey hole. Because an anchor trolley isn’t restricted to just a single anchoring system, it’ll make it extremely appealing to kayak anglers which make most mid-trip adjustments.
Anchor Trolleys Finally Affordable
Rigging an kayak anchor trolley has a solid footing as an extra bonus for a skilled angler or paddler. Just like picking out the perfect kayak paddle you’ll also need a good kayak anchor system in place. However, an increasing amount of anglers and paddlers of all skill levels are discovering methods of incorporating these methods because the kits are becoming more customer friendly and affordable.
As you purchase a Yak Gear Anchor Trolley (irrespective of whether it’s the Pad Eye System Basic Anchor Trolley, Harken Pulley Deluxe Anchor Trolley, or Stainless-Steel Deluxe Anchor Trolley) you’ll get ALL required installation hardware and a very in-depth, but simplistic set of “DIY” instructions for installation. It’s making paddling a more practical, safer, and more pleasurable experience to the point of the accessories becoming a necessity. As a matter of fact, manufacturers of kayak’s have also incorporated more and more anchor trolleys to their boats.
Kayak Anchor Trolley: What are the benefits?
- The kayak anchor trolley is a method of not just staying in one place yet to have the ability to remain in one place and face the direction you want to face.
- The anchor trolley is utilized so that you’re able to fish into the wind, with the wind at your back, or cross current with the wind.
- The anchor trolley will make it a lot easier to pull the anchor up and permits full control for a user while anchoring in any kind of water.
- Utilize the kayak anchor trolley system to turn the boat around without taking the anchor out.
Why Should You Want a Kayak Anchor Trolley?
Kayak anchor trolleys help the angler to easily and quickly adjust the tie-down location of the anchor upon the kayak. Also, it’ll make it a lot easier to pull up the anchor by permitting the tie-down to move toward an angler within an easier and more convenient area to access. This flexibility offers full control for an angler while anchoring in any kind of water. It is worth buying a kayak anchor trolley, and here’s the good news: they are a lot more affordable than they sound.
Kayak anchor trolley: How does it work?
Kayak anchor trolleys are rail/pulley systems that are made with ropes which establish a rapid tie down location any place on the length of the kayak. Usually kayak anglers travel with a 3 to 3 and a ½ lb. anchor. Due to the nature of kayaks, anglers require easy accessibility to almost everything inside the boat. The system provides the angler a convenient and easy method of setting the anchor then adjusting its position to the perfect area on the kayak. Here is how it’ll work:
- Two eye loops are connected to the hull upon one part of the kayak, roughly the kayak’s length.
- A lengthy rope is fed through these two loops, with each part tied to a metal ring connecting the rope together. This forms a very thin, extremely long oval on the part of the hull.
- Now with the rope in place, an angler may slide the ring’s position to the stern or the bow, wherever he would like the anchor line to be set.
- Utilizing a clip that is attached to an anchor line, clip that anchor line to the metal ring upon the kayak anchor trolley then drop the anchor off of the side of the kayak.
- Now, depending on preference, an angler may change the position of the anchor line.
Why do you want a kayak anchor trolley?
If you have plans on fishing in any type of current, even inside small lakes and ponds, there is going to be a time in which you will not want to drift from the spot. Being inside the center of a hot bite isn’t the time to drift away to another location. Simply tying an anchor off to a certain location on your kayak will not work because of the boat’s size and direction the current might take you. With the kayak anchor trolley, you’ll control the precise placement of the tie off in order to optimize your kayak’s position.
Kayak anchor trolleys: Are they expensive?
Not at all. At the time of this writing, multiple kayak anchor trolleys may be found on Amazon for under $40. There are many offerings available, you simply have to choose the one that is proper for you. We are partial to YakGear’s kit, however, there are a multitude of great options available.
It’s possible to find what you are searching for on Amazon. Do not forget you will require an anchor, as well. We like KWIK TEK’s Anchor System. It is 3 and 1/3 lbs. in weight, has 4 flukes and is available with 25’ of marine-grade, durable rope. Also, it has a float and clip for easy off, easy on connection with a kayak anchor trolley. Check it and see for yourself why it would work for you, as well as your kayak.
Add a bit more control to a versatile kayak by putting on a kayak anchor trolley. You will not regret the extra benefits of owning it. Anchoring ought to be simple and with the use of a kayak anchor trolley, it will be.
Ways to use the Kayak Anchor Trolley
Using the kayak anchor trolley is easy to reach and simple. These are important features for the kayak tool. We have such a restricted quantity of space to work with while we are in the water; therefore, having fast accessibility to an anchor helps.
- A rope runs through 2 eyelets which are sitting at the tail end and the nose of your boat at the upper part of the hull.
- The system permits users to slide their rope through the eyelets in order to move the anchor from the bow to the stern, or any place in between.
- As you have your anchor is the right position, utilize the clip that is attached to the anchor line to hold it into place or allow it to run all of the way to the boat’s end.
- Wait for the current and wind to take the anchor and make the line tight then begin to cast.
- After you fish, it’s possible to use your trolley to bring your main anchor line back by sliding your rope through the eyelets once again. Pull your anchor back out from the water then go to the next spot!
Ways to Install the Anchor Trolley System
The Anchor Trolley System is a critical kit piece required to safely anchor the kayak. The anchor trolley permits you to shuttle your anchor line to the kayak’s stern or bow so it’s possible to safely anchor the kayak in line with the prevailing wind, chop, swell, and tide conditions. It will decrease the opportunities of the conditions tipping your kayak over. CSG Anchor Trolley kit contains all of the items necessary to rig the anchor trolley to the fishing kayak. Making the most of your kayak fishing trip.
This section is going to run through the measures involved with putting in the CSG Anchor Trolley kit onto the fishing kayak.
The CSG Anchor Trolley Kit Contains:
- 4 Well Nuts that have Stainless Steel Bolts
- 1 Stainless Karabiner – in order to incorporate inside the anchor trolley loop for an anchor line to pass through
- 2 short lengths of bungee cord that attach the pulleys to pad eyes – it’ll act as a shock absorber and keep anchor trolley line taut
- 2 Pad Eyes
- 2 Stainless Steel Pulleys
- 10m Black Polypropylene Cord
- Marker Pen
- Sealant – we suggest Marine Goop, yet Clear Silicon may be used
- Drill using an 8.5mm – 9mm Drill Bit – don’t use bigger!
- Position your pad-eye close to the kayak’s stern, ideally within 8” of the back and above the kayak’s waterline. Mark the pad eye holes then drill them with an 8.5 millimeters drill bit. A 9 millimeters bit may be used yet don’t utilize any larger because the well nuts can pull out through the holes.
- Put the well nuts inside the holes – they might need some persuasion to push in and it’s easier if the bolt is screwed inside the well nut. A snug fit is better than a loose fit. If it’s too difficult to get your well nut inside the hole, widen your hole somewhat until a tight fit is accomplished. We suggest using a sealant like Clear Silicone or Marine Goop to make sure there’s a waterproof fit.
- Fit your pad-eye back over your well nuts and place the bolt through your pad-eye hole then down inside the well nut. Gradually tighten the bolts down until a firm hold is accomplished, but don’t over tighten as it’ll cause the well nut to fail.
- Repeat measures 1 through 3 at the kayak’s bow.
- Use your shock cord to tie your stainless-steel pulleys to your pad-eyes.
- Run your 5 millimeters polypropylene cord through your pulleys then join the ends in order to form a loop by tying both ends onto your stainless-steel Karabiner. The Karabiner is better placed on the lower part of the anchor trolley. Trim any excess cord off and utilize a lighter/flame that melts the ends in order to keep them from becoming frayed. The Karabiner now should freely run from the bow to the stern.
- The Anchor Trolley System now is completely installed and prepared to use along with the selected Anchor Kit.